Pain Relief-Shop.com > TDP Lamp CQ35B

TDP Lamp CQ35B (Digital Mineral Lamp)

This improved second generation TDP Lamp provides focused deep heating in therapeutic treatments to relieve sore muscle and muscle pain. TDP CQ 35B also increases the blood circulation and metabolism

Raises the temperature in tissues

Expands capillary vessels

Rejuvenates cells

Promotes blood circulation

Helps move toxins from cells

Improves Lymphatic system functions

Retail Price : $259 > Now Only US $229

Why is TDP CQ-35B better than other models?
Specification & Safety Cautions

Why is TDP CQ-35B better than other models?

This TDP Lamp CQ-35B has a more accurate timer and longer time of usage than CQ12 B or CQ-29
Unlike other Mineral Lamp models, CQ35B notifies you when to change the mineral plate.

The mineral plate must be replaced after 1500 hours of usage, otherwise it's therapeutic effect will be decreased.

These TDP Lamp models with - Upgraded Timer design, Microcomputer Processor, Digital & Liquid Crystal Display, Accumulative Memory Timing.

The Timer will add, counts and calculate Accumulative Usage Time of the Lamp and inform when to replace the Mineral Plate (changing the Mineral Plate needed when it has been used for 1000 hours and Potency is low).

Using TDP Mineral Lamp with Potent Mineral Plate will improve the Therapeutic Effect of the TDP Mineral Lamp.

Click Here To Share and Enjoy >>

Special Features TDP Lamp CQ-35B

Increased timing range (95 min)
Notifies you when to change the mineral plate
Timing Warning Device
Second generation lamp

Extra Features TDP Lamp CQ-35B

Computer chip
Electronic timing
Digital control
Liquid crystal display

Replacing the Mineral Plate:

1. Use screwdriver to push the 3 metal tabs (located on the edge of the cover) downward in order to remove the protective cover from the lamp head.

2. Use screwdriver to unscrew the center screw in the middle of the mineral plate & then remove mineral plate from lamp head.

3. Place new mineral plate in lamp head and make sure to tighten the screw in the middle of the mineral plate.

4. Put the protective cover back onto the lamp head (you will need a screwdriver to push the 3 metal tabs slightly upwards in order for the cover to snap onto the lamp head).

Replacement Parts
TDP Lamp
Mineral Plate for CQ-35

* Emission plate life: 1,200 to 1,500 hours (approx 2 years)
Now Only US $30

Go To Top

Testimonials

"I like that the heating element is caged all the way to prevent accidental burns, other's don't do that. I like both floor model CQ-35B and desktop model CQ-12B, desktop model can be portable, travel with possibly. I use it mainly on my knees when I do some walking, I usually use the lamp before exercising. Seems to help heat up joints, gives me more range of movement when walking. I believe it also helps repair joint damage, and also muscle tears. Boyfriend uses it for back and when he has overdone it on exercising. "

Belinda, Las Vegas, Nevada

Go To Top

Specifications - TDP Lamp - CQ12

Safety & Cautions

Spectrum Range: 2 to 50 microns
Output: 60 Hz, 250 watts
Power: 110 volt
Digital Timer: YES
Digital Display: YES
Auto Timer: 4 digital LCD Indicator
Emission plate life: 1,200 to 1,500 hours (approx 2 years)
Intensity: 28 to 34 mw/sq cm in intensity
Treatment Distance, range: 12" to 18" (30 to 45 cm)
Optimum skin temperature: 104 to 113 Fahrenheit (40 to 45 Celsius)
Warm-up time: 10 to 15 minutes
Extendable range: 24" vertical, 24" horizontal
Min/max height: 12" to 60" above floor
Telescoping main post: 12" adjustment
Device head adjustment: tilted up to 90 degrees, rotated 360 degrees
Diameter Mineral Plate: 7"
Stand design: Floor model, 5 point base with casters
Weight (unit only): 25 lbs

Digital Control Panel

Do not use the Infrared lamps if:

High Fever
Open pulmonary tuberculosis, serious arteriosclerosis
Tendency of bleeding
Abdominal pain
Over the eyes
When body is wet
If pregnant
swollen inflamed area, with
hypertension must avoid head application
Keep out of the reach of children

Ensure that nothing is touching the lamp head during operation.

The TDP should be protected against dampness and violent percussions. The plate must be kept intact and must not be cleaned with any type of liquid.

One must take effective measures to protect and cover one's eyes when the lamp is being used for facial treatments