
How Do I Use the TDP Lamp?
The TDP Lamp is an amazing beneficial lamp that provides both heat therapy and mineral therapy to heal your pain – whatever its source – and improve your overall health and well-being.
It is convenient and easy to use, making it the more effective, more accessible treatment over doctors and spas. Instead of waiting and paying for appointments, the TDP Lamp allows you to treat pain as it happens, daily if needed. You just have to know how to use the lamp to see the benefits – and you won’t believe how easy it is!
1. Positioning the TDP Lamp:
Position the lamp 12” to 16” inches from the body, for whatever problem area you are targeting. This guarantees both effectiveness and safety.
2. Setting the Timer for Treatment:
The average treatment should last about 20 to 40 minutes, so set the timer for a time within that range. You can decide to make the treatment longer or shorter, depending on the severity of your problem.
3. Making A Plan of Treatment:
When you are treating a specific pain, ailment or injury, set a course of treatment that responds to the severity of your problem. The course for more serious issues can last for 6 to 20 treatments, and these treatments would be daily.
Remember, these treatments can be 20 to 40 minutes. For lighter discomfort, use a treatment plan of seven daily treatments for 30 minutes each.
4. What the TDP Lamp Will Do:
The TDP Lamp will use heat therapy to immediately soothe pain and relax muscles. It will de-stress and calm. The innovative combination of far-infrared energy (the best for human body absorption) and a solution of 33 minerals will deliver nutrients to your body’s cells, to help detoxify, heal and rejuvenate. The lamp can be used for anything from light muscle pain from a work-out to pain from fibromyalgia.
5. How the Timer Works:
The TDP CQ29 and the TDP CQ12B have manual timers that can be set to a maximum of 60 minutes. After 60 minutes – or the time you set it to – it will automatically shut off. This promises you get the treatment you need. Plus, you never have to worry about turning it off, because this automatic timer is all you need to turn the lamp off.
6. Replacing the Mineral Plates:
The mineral plate is the revolutionary part of the TDP Lamp that is coated with a solution of 33 minerals delivered to the body when the infrared energy is emitted. These plates have a life of 1,000 to 1,500 hours, and after this time should be changed to ensure maximum effectiveness.
Simply pop up the three tabs on the lamp head holding the protective covering with a screwdriver. Remove the protective covering and unscrew the screw in the middle of the mineral plate. Remove the mineral plate and replace with the new plate, screwing the screw back in to hold in place. Replace the protective covering and pop the tabs back down.
7. How the TDP Lamp Is Mobile:
Desktop versions of the TDP Lamp are compact and easy to move/carry. They are only 25 pounds and 2 feet tall. Floor models have five swiveling wheels so the lamp can be moved to wherever you may need it.
8. Administering Treatment:
- Before the lamp head stem can fit into the hole on the stand, you must unscrew the two small screws on the bottom of the hole. After the lamp head stem is secured in the hole, you must tighten the two small screws.
- Plug the lamp’s power cord into a nearby outlet.
- Turn the switch on the lamp to “on,” and let the lamp warm up for 3 to 5 minutes.
- After 3 to 5 minutes, the lamp’s timer can be set by twisting the dial to desired time.
- You can turn the timer off at any time, or let the time run until it is automatically shut off.
- Unplug the lamp when finished.

Extremely Safe with Protecting cap

The Mineral Therapy head is fully replaceable and has a working life of 1000 - 1500 hours. Replacement heads are available from us.
The floor standing version of the TDP healing lamp features 5 wheels for easy movement allowing you to place the lamp at the perfect angle for treatment. The wheels also allow for easy storage of the healing lamp.






